K Rend K Lime on to Brickwork or 7N Blockwork

Summary: K Rend K Lime 213 onto Brickwork or 7N Blockwork
 
Substrate: 7N Open Textured, Medium Density Concrete Block & Brickwork

 

Primer Coat: K Lime SB 1 – Stipple Bond One Coat

Mixed to a paste consistency & universally applied by scud spatterdash coat, to Brickwork areas only at a min 2-3mm. Allow 1 day min to set & cure.

Thickness 2-3mm

Undercoat 1: K Lime 213

Apply by hand or machine in Two x 6mm passes – embedding alkali resistant glassfibre meshcloth midpoint between K Lime passes, to isolated areas only, where movement is anticipated, stress area or change of substrate. Rule to line & level, lightly scratch surface & allow to cure for 24 hours minimum.

Thickness: 12 mm

Final Coat: K Lime 213

Apply by hand or machine. Rule to line and level. Finish smooth with float finish and allow to fully cure.

 

Thickness: 10 mm
 

Finish: K Lime Mineral Paint

Two coat application Lime Mineral Paint, allowing time curing between coats.

Disclaimer: The above is a high-level breakdown for a specified render system and was fully up to date and correct at the time of writing. Whilst we endeavour to ensure this page is kept up to date in line with any changes made by the manufacturer, we strongly recommend customers verify the above information directly with the manufacturer prior to a making a purchase or the application of any products and do not rely solely on the information provided above when making a decision. We accept no liability or responsibility for losses or damages occurring as a result of a customer’s failure to comply verify the above information. The render system should be applied in strict accordance with the manufacturer's instructions and specifications. These can be obtained directly from the manufacturer.