K Rend Monocouche Render System onto Brickwork

Summary: K Rend Silicone K1, Scraped Texture Finish onto brickwork

Substrate:  Clay, Concrete or Calcium Silicate Brick 

Primer: K Rend R7 Acrylic Bonding Aid

Dilute with water 1:4, applied by brush or roller; the next render coat is applied while the 
primer is still wet.

Base Coat: K Rend HP12 Base Coat

Apply in one 6 mm pass with K Rend Alkali Resistant Mesh embedded at stress points. Rule to line and level and finish the surface with a light horizontal scratch. Allow to cure for a minimum of one day (or two days if the max temp is below 10 °C)

Total Base Coat Thickness: 6 mm

Finish Coat: K Rend Silicone K1

Apply in one 12 mm pass. Rule to line and level and allow to semi-set prior to scraping.

Disclaimer: The above is a high-level breakdown for a specified render system and was fully up to date and correct at the time of writing. Whilst we endeavour to ensure this page is kept up to date in line with any changes made by the manufacturer, we strongly recommend customers verify the above information directly with the manufacturer prior to a making a purchase or the application of any products and do not rely solely on the information provided above when making a decision. We accept no liability or responsibility for losses or damages occurring as a result of a customer’s failure to comply verify the above information. The render system should be applied in strict accordance with the manufacturer's instructions and specifications. These can be obtained directly from the manufacturer.