K Rend Thincoat Render System onto Concrete
Summary: Silicone TC15 onto Dense Concrete with R10 and HP12
Substrate: Dense/Reinforced Concrete
Primer: K Rend R10 Bonding Aid
Applied in one uniform coat by brush or roller. Allow to cure for 24 hours prior to application of HP12 Base Coat.
Base Coat: K Rend HP12 Base Coat
Applied in two 4mm passes with K Rend Alkali Resistant Reinforcing Mesh embedded to stress points. Rule to line & level and leave with a float finish. Allow to cure for a minimum of 14 days.
Total Base Coat Thickness: 8 mm
Primer: K Rend Primer TC
Apply by brush or roller. Allow to dry for 24 hours prior to application of final finish coat.
Finish Coat: K Rend Silicone TC 15
Apply by hand or machine to the thickness of largest aggregate. Allow to take up slightly prior to rubbing up to create the final texture. Surface should be rubbed uniformly to finish.
Disclaimer: The above is a high-level breakdown for a specified render system and was fully up to date and correct at the time of writing. Whilst we endeavour to ensure this page is kept up to date in line with any changes made by the manufacturer, we strongly recommend customers verify the above information directly with the manufacturer prior to a making a purchase or the application of any products and do not rely solely on the information provided above when making a decision. We accept no liability or responsibility for losses or damages occurring as a result of a customer’s failure to comply verify the above information. The render system should be applied in strict accordance with the manufacturer's instructions and specifications. These can be obtained directly from the manufacturer.
Products
