K Rend Thincoat Render System onto Medium Dense Blockwork (7.3kn)

Summary: Silicone TC15 onto 7kn Medium Density Concrete Block with HP12 Base     
 
Substrate: 7kn Medium Density Concrete Block

Base Coat: K Rend HP12 Base 

Applied in two 5 mm passes with alkali resistant glass fibre mesh cloth embedded to stress points.  Rule to line & level and leave with a float finish. Allow to cure for a minimum of 14 days     

Total Base Coat Thickness: 10 mm  

TC Primer: K Rend Primer TC

Apply by brush or roller. Allow to dry for 24 hours prior to application of final finish coat. 
 
Finish Coat: K Rend Silicone TC15

Apply by hand or machine to the thickness of largest aggregate. Allow to take up slightly prior to rubbing up to create the final texture. Surface should be rubbed uniformly to finish.

Disclaimer: The above is a high-level breakdown for a specified render system and was fully up to date and correct at the time of writing. Whilst we endeavour to ensure this page is kept up to date in line with any changes made by the manufacturer, we strongly recommend customers verify the above information directly with the manufacturer prior to a making a purchase or the application of any products and do not rely solely on the information provided above when making a decision. We accept no liability or responsibility for losses or damages occurring as a result of a customer’s failure to comply verify the above information. The render system should be applied in strict accordance with the manufacturer's instructions and specifications. These can be obtained directly from the manufacturer.